Those who seek the most from their car know that in the rigors of competition you need to extract every ounce of performance from your machine. You need the capability to have every degree of adjustment above and beyond that of a street driven vehicle. You need the strength to withstands the stresses and strains of hard corners, a rough course and brutal weight transfer and chassis flex.

It is within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any comptition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.

Megan Racing Trailing Arms Applications

Honda Megan Racing Trailing Arms

MR-6106

1992-1995 Honda Civic (Rear Trailing Arm Bushing)

Mazda Megan Racing Trailing Arms

MR-6316

1993-1997 Mazda RX7 (Rear Lower)

Mitsubishi Megan Racing Trailing Arms

MR-6442

1995-2005 Mitsubishi Eclipse (Rear Adjustable - Right and Left)

Toyota Megan Racing Trailing Arms

MR-6574	1989-1995 Toyota MR2 (Rear)
MR-6412	2000-2008 Toyota MRS Spyder (Rear Adjustable)

Honda Megan Racing Trailing Arms

MR-6106

Honda Civic 92-00 Rear Trailing Arm Bushing
Model Number : MR-6106

Designed for the 92-95 Honda Civic, these Hard Rubber bushings take the place of the OEM Soft Rubber bushing that attaches the trailing arm to the chassis. This offers a more stable and direct feeling during cornering and at higher speeds. The Hard Rubber bushing does not require maintanence or lubrication and performs with little or no noise.

Professional installation is required as you will need to use a press to remove the old bushing and install the new one. A slight vibration may be felt due to being able to feel the road more directly.

150% Harder that stock bushings

Made with high-strength and anti-craking rubber material

Rubber viscosity is around 2000KGS

Mazda Megan Racing Trailing Arms

MR-6316

Mazda RX7 93-97 Rear Lower Trailing Arms
Model Number : 6316

The Mazda RX7 (FD3S) has always been the Mazda s High-Performance machine since it s earlier generations. The Front-Engine Rear-Wheel drive platform handles like a dream while the Powerful light-weight rotary engine screams to the High-RPM s and powers the RX7 with ease.

A well-balanced machine that is designed for the street but is formidable at the race track as well was still designed conservatively. But for those who push the limits and take every ounce of potential from their vehicles, the stock power and handling needs the ability to be fine tuned to perfection.

Megan Racing has developed our Control Arms for the RX7. Constructed of a Lightweight yet strong Steel-Alloy, they are perfectly suited for competition purposes that can withstand the extremes of track-driving while still being suitable for the daily driver.

These trailing arms allow the adjustment of Caster in the rear wheels which can drastically effect the responsiveness of the car during hard cornering or drifting. The Pillowball ends replace the OEM soft-rubber bushings which absorb too much energy that is then wasted... the result is a more direct feel with no energy lost in the suspension system.

High-Strength Steel Alloy

3-Stage Powdercoating Process

Adjustable Length for Caster Adjustment.

Self-Lubricating Pillowball End-Links

Toyota Megan Racing Trailing Arms

MR-6574

Toyota MR2 89-95 SW20 Rear Trailing Arms
Model Number : MR-6574

The MRS is Toyota's most recent version of their popular Mid-Ship platform that has been the favorite of many track-minded drivers for almost two decades. Although difficult to master, the MR-Platform is considered perhaps the strongest platform as the car has the ability to be a perfect 50:50 balance of weight between the wheels.

The MR-Platform is difficult to master due to the sensitivity of weight-transfer which can cause the car to seem unstable; because of this fact the alignment is absolutely CRUCIAL in this vehicle and can greatly effect the stability and handling.

Megan Racing Inc. has developed reinforced and adjustable control arms to accomidate the needs of the aggressive and performance oriented tuner. Being constructed of a Lightweight Steel-Alloy which is able to withstand the stresses of extreme competition, these arms are powdercoated with a 3-Stage process to ensure durability and protection against the elements.

These Traction rods allow for fine-tuned adjustments to the rear suspension geometry. By changing the length of the traction rod you change the position and pitch of which the suspension rotates upon and you change the amount of "Anti-Squat" of the rear. Although the adjustment is minimal, it can change the behavior or the vehicle during weight transfer.

Constructed of Steel Alloy for Lightweight yet Durable performance.

Teflon-Injeted Heim Joints for a more direct feel and driving experience.

Easy to access turnbuckle-style adjustment.

Can be adjusted without removing from the vehicle.

Megan Racing Trailing Arms Reviews, Installation Tips, Questions, and DIY

Questions
Please use this form to ask us any question regarding this product.

Reviews
Do you have experience with this part? We encourage you to post your review here, for other Redline Motive users.

Installation Tips
Not sure how to install this product? We recommend you ask in our forums.

Your comments here will be reviewed and then posted on our site for other users benefit. Thank you!