|
|
|
 Replacement Parts Catalog
OEM Replacement Parts Catalog
|
Latest Mitsubishi Cam Follower Applications
| |
Mahle Cam Follower
07/96 - Mitsubishi Diamante 3.5 SOHC 6G74 24 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower |
|
Mahle Cam Follower
05/88 - 09/91 Mitsubishi Montero 3.0 V6 6G72 12 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower |
| |
Mahle Cam Follower
06/98 - Mitsubishi Montero Sport 3.5 6G74 24 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower |
|
Mahle Cam Follower
02/98 - Mitsubishi Galant 3.0 V6 6G72 24 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower |
| |
Mahle Cam Follower
06/97 - Mitsubishi Mirage 1.5 4G15 Hyraulic Valve Adjuster
12 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower |
|
Mahle Cam Follower
06/01 - Mitsubishi Lancer 2.0 4G94 Hyraulic Valve Adjuster
16 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower |
 |
GMB Cam Follower
06/89 - Mitsubishi Pickup 2.4 4-Cyl 2WD 4G64 Hyraulic Valve Adjuster
8 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. |
 |
Cam Follower
06/89 - 05/92 Mitsubishi Galant 4WD exc.Turbo 4G63 16 per engine When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first Cam Follower When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. |
|
GMB Cam Follower
90-94 Mitsubishi Eclipse 1.8 SOHC 4G37 Hyraulic Valve Adjuster
8 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. |
|
GMB Cam Follower
06/84 - Mitsubishi Montero 2.6 4-Cyl. G54B Hyraulic Valve Adjuster
8 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. |
|
Cam Follower
04/89 - 01/94 Mitsubishi Eclipse GSX Turbo DSM 4G63 (16 per engine) When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the fir Cam Follower When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. |
|
GMB Cam Follower
06/89 - Mitsubishi Pickup 3.0 V6 4WD 6G72 12 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. |
|
Cam Follower
04/90 - Mitsubishi 3000GT 3.0 DOHC 2WD 6G72 (24 per engine) When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the fir Cam Follower When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. |
|
GMB Cam Follower
06/95 - 04/99 Mitsubishi Eclipse 2.4 SOHC 4G64 Hyraulic Valve Adjuster
16 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. |
|
GMB Cam Follower
06/94 - 04/96 Mitsubishi Montero 3.0 6G72 24 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. |
|
Cam Follower
02/91 - 05/95 Mitsubishi Diamante 3.0 ES SOHC 6G72 (24 per engine) When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the fir Cam Follower When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. |
 |
Cam Follower
01/94 - Mitsubishi Eclipse 2.0 DOHC A588 When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. Cam Follower When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. |
|
GMB Cam Follower
09/96 - Mitsubishi Montero Sport 3.0 6G72 24 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. |
|
GMB Cam Follower
02/93 - 01/98 Mitsubishi Galant 2.4 SOHC 4G64 Hyraulic Valve Adjuster
16 per engine When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. Cam Follower When changing valve lifters, it is recommended that the lifters be allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves may make contact with the piston, resulting in valve breakage at the collet groove. It is best if the engine is allowed to rest overnight before starting it for the first time. If possible, the engine should be hand cranked before first start up. |
|
Cam Follower
05/88 - 04/94 Mitsubishi Eclipse 2.0 DOHC 4G63 (16 per engine) When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the fir Cam Follower When changing valve lifters, it is recommended that the lifters are allowed to "settle/seat" for a minimum of 30 minutes to allow excess oil to drain. If this recommendation is not followed, some valves will make contact with the piston, resulting in the valve to break at the collet groove. It is als o ideal if the engine is allowed to rest over night before starting the eng ine for the first time. If possible, the engine should be hand cranked or turned by hand the first time. |
Some Mitsubishi Cam Follower Applications (View Full Catalog Above)
| Mitsubishi 3000GT 3.0 DOHC 2WD |
Mitsubishi 3000GT 3.0 SOHC 2WD |
Mitsubishi 3000GT VR4 Turbo |
| Mitsubishi Diamante 3.0 ES SOHC |
Mitsubishi Diamante 3.5 SOHC |
Mitsubishi Eclipse 1.8 SOHC |
| Mitsubishi Eclipse 2.0 DOHC |
Mitsubishi Eclipse GST Turbo DSM |
Mitsubishi Eclipse GSX Turbo DSM |
| Mitsubishi Eclipse 2.4 SOHC |
Mitsubishi Eclipse 2.4 SOHC-16V |
Mitsubishi Eclipse GT |
| Mitsubishi Galant 2.0 DOHC 2WD |
Mitsubishi Galant 2.4 4-Cyl. |
Mitsubishi Galant 2.4 DOHC |
| Mitsubishi Galant 2.4 SOHC |
Mitsubishi Galant 3.0 V6 |
Mitsubishi Galant 4WD exc.Turbo |
| Mitsubishi Lancer 2.0 |
Mitsubishi Mirage 1.5 |
Mitsubishi Mirage 1.8 |
| Mitsubishi Montero Sport 2WD 3.0L |
Mitsubishi Montero Sport 3.0 |
Mitsubishi Montero Sport 3.5 |
| Mitsubishi Montero 2.6 4-Cyl. |
Mitsubishi Montero 3.0 |
Mitsubishi Montero 3.0 V6 |
| Mitsubishi Montero 3.5 |
Mitsubishi Pickup 2.0 2WD |
Mitsubishi Pickup 2.4 4-Cyl 2WD |
| Mitsubishi Pickup 3.0 V6 4WD |
| 4G15 |
4G37 |
4G63 |
4G64 |
4G93 |
4G94 |
6G72 |
6G74 |
| A588 |
G54B |
G63B |
More Applications (View Full Catalog Above)
|
|
